General
- 23 Articles
- Published on Jun 1, 2022
Description
This guide will show one way to update the camera by the NVR remotely.
Operation Procedure
Step 1. Go to Camera---Edit Camera and move to the right, You can choose to individually or batch upgrade.
Step 2 Select path of th...
- Published on Feb 14, 2022
If you are looking for the software for Eyeonet recorder or Eyeonet configuration tool,
You can go to our website to download Eyeincloud/IP Tool:
https://www.ametagroup.com/software
If you are looking for the firmware for Eyeonet device,
Ple...
- Published on Feb 14, 2022
StandAlone LPR camera web interface setup in some cases when Eyeonet LPR working standalone Or working with 3rd party NVR/DVR.
Use IPToolV2.0 to find your LPR camera IP address.
Accss LPR web interface
ANPR section - Enable Dectection a...
- Published on Feb 14, 2022
Introduction
Update firmware by local USB drive
Find new firmware based on your device model.
https://www.ametagroup.com/eyeonet-recoder-firmware
Download firmware file , put into USB stick root folder.
Plug in USB stick to Local DVR Go...
- Updated on Apr 22, 2022
- Published on Feb 14, 2022
Introduction
This guide shows how to add Eyeonet IPC to Dahua NVR. It include how to use IPTool2.0.
We need to have a PC and a POE switch to do a few setup for camera before adding to Dahua NVR. Your PC and Eyeonet cameras should all connect to ...
- Published on Feb 14, 2022
Description
This guide will show one way to update the camera by the NVR unit with a USB disk.
Note: Old NVRs may not have the feature. Please make sure to update NVR to the lastest firmware for this feature.
Example
To resolve recent issue of...
- Published on Feb 14, 2022
Description
This guide shows you how to enable WDR on a recorder web interface.
Go to main menu -> [Image settings]
Click on the [Advanced] arrow, a slide down list shows up
Then you are able to enable the WDR or modi...
- Published on Feb 14, 2022
Description
Here are two places that you can check for the lens control function:
Under the [Image Adjust] -> [Lens Control] -> [Zoom in/Zoom out]
Under [PTZ Control] -> [Preset]
- Published on Feb 14, 2022
Description
This is a quick guide for Eyeincloud App setup for remote viewing DVR/NVR.
- Published on Feb 14, 2022
Description
This guide shows you settings on DVR input channel signal.
Live view-> Setting-> Camera ->Image Setting
Manage Camera -> Camera Signal
Signal
- Published on Feb 14, 2022
Description
This guide shows how to pull out Camera internal setup and how to transfer the signal type by DVR.
If you look for DVR input signal swap, please check How to change Eyeonet DVR input channel signal?
Note: This operation applies to C...
- Published on Feb 14, 2022
Camera Web Interface
Config Home -> Image -> Display Setting, Change frequency 50Hz (PAL)to 60Hz(NTSC)
- Updated on Sep 27, 2022
- Published on Feb 14, 2022
Description
This guide shows how to add 3rd party IP cameras such as Hikvision Brand to Eyeonet NVR.
Note: The new version of the Hikvision camera may have a different interface.
Hikvision Camera Web interface
Enable Onvif and add onvi...
- Published on Feb 14, 2022
Guide for Tour Setup
Step1
Find Tour Setting, It' under System ->Output Setting. You can create customized views on Dwell panel.
Step2
Go back to Live View, find the "Loop Play" icon below to start up the tour. You can set the interval ...
- Published on Feb 14, 2022
Description
This instruction shows how to set up Email linkage on DVR/NVR.
Note: Only Gmail is available to use as a sender. Turn on Less-Secure-Acess under Gmail Account Security Setting before email linkage setup.
Step1 Home page -> Setti...
- Published on Feb 14, 2022
Port Configuration Click Start ->Settings ->Network ->Port to go to the interface as shown below. Define the POS port of the NVR, then click “Apply” to save the settings.
POS Port: the default HTTP port of the NVR is 9036.
POS Setti...
- Published on Feb 14, 2022
Go to main menu>[Camera]
Click on [Add Camera]
Click on the [Add Recorder] tab>[Add], a window will pop up and show all recorder under this network
Choose the channels you need to add, click on [OK], the rec...
- Published on Feb 14, 2022
Note: This Software is an old version. New version Eyeincloud may have a different interface.
Customize your view, choose the wanted camera, and preferred position, then close it.
A window will pop up, ask whether you want to save th...
- Published on Feb 14, 2022
Go to the main menu, under [Camera], click on the [Add camera].
Choose the camera you need to modify password, click on the pen icon, which is the [Edit] button.
Modify the IP address and gateway, and please make sure you put ...