Maintenance

Prev Next
  • Published on May 22, 2024
Please Config your doorbell through DMSS first, and make sure your doorbell is in the same network with your NVR Instructions: > If your DB6I is black version: Please follow below steps: Steps: Go to set...
  • Updated on Nov 8, 2022
  • Published on Oct 11, 2022
Description This article will show you how to reboot and factory default Aibase Color NVR and IP camera. Prerequisite Recorder model: NVR-3216-16P-AI / NVR-3104-4P-AI / NVR-3108-8P-AI Camera model: Step by St...
  • Published on Oct 11, 2022
Description This article will show you how to set up an user account in a NVR Prerequisite Recorder model: NVR-3216-16P-AI / NVR-3104-4P-AI / NVR-3108-8P-AI Step by Step instruction Go to: Remote Settin...
  • Updated on Jun 20, 2023
  • Published on Oct 23, 2022
Description This article is the instruction of Upgrade firmware for the AiBase Color NVR and IP Camera Prerequisite Recorder model: All Aibase color recorders and IP cameras Step by Step instruction ...
  • Published on Oct 23, 2022
Description This article is the instruction of how to format the hard drive from the recorder Prerequisite Recorder model: All Aibase color recorder Step by Step instruction You can login to the NVR throu...
  • Published on Oct 24, 2022
Description This article is the instruction of How to default your IP camera through NVR Prerequisite Recorder model: All Aibase color recorder Step by Step instruction To default a camera, which is add...
  • Published on Nov 29, 2022
Find the reset hole in the back of the recorder When the power is on, insert the pin for 10 seconds and the system will restore the factory Settings.
  • Published on Jan 23, 2023
Prerequisite Make sure your recorder has connected to the Internet successfully. We have two ways to upgrade firmware: ** Locally upgrade the firmware.** 1.Upgrade the recorder firmware first. System--->Upgrade-...
  • Published on Jan 27, 2023
Prerequisite Recorder model: Aibase color recorder Camera model: Support Onvif protocol. Step by Step instruction You need to modify the camera IP address first. You have to change IP address to 10.10.25.151-*...
  • Published on Feb 9, 2023
NOTE: We enable smart illumination by default Step by Step instruction Go to NVR setting----Alarm----deterrence----Select channel and disable light Save it All Yellow light will be disabled. If you get cameras include bl...