Outdoor Station

Prev Next
  • Published on Dec 4, 2024
Description Do Not Disturb(DND) feature allows devices to reject automatically incoming calls and prevents users from being disturbed. What You Should Know Different device models support different DND modes. One only rejects SIP calls and ano...
  • Published on Dec 4, 2024
Description Akuvox intercom devices support registering two SIP accounts. Users can make Dial Plan SIP Calls using either account 1 or account 2 without switching between them manually. Note The following models with sp...
  • Published on Dec 4, 2024
Description Group call feature allows users to call all the contacts simultaneously in a group. Initiating a group call on the door phone will ring all indoor monitors in the designated group. This saves time from calling each device separately. ...
  • Updated on Dec 4, 2024
  • Published on Dec 4, 2024
Description When users initiate a sequence call on the door phone, the target numbers will be called in order until someone answers. This feature is useful when the homeowner is unavailable, as it can forward the call to another family member. C...
  • Updated on Dec 4, 2024
  • Published on Dec 4, 2024
Motion detection is the process of detecting a change in the position of an object relative to its surroundings or a change in the surroundings relative to an object. This function can be used to detect changes in the environment around your house...
  • Published on Dec 3, 2024
The maximum capacity is 16GB. The format is VFAT.
  • Updated on Nov 25, 2024
  • Published on Nov 25, 2024
Power-On Operation 1. Power on the device with 12V/1A power supply and wait until the device Call button  light turns RED  breathing light and hear the bee tone from El2W. (RED) Wi-Fi Configuration (BLUE WIFI) 2. Press the T...
  • Updated on May 27, 2022
  • Published on Apr 25, 2022
User Manual
  • Updated on May 27, 2022
  • Published on Apr 25, 2022
User Manual
  • Updated on May 27, 2022
  • Published on Apr 25, 2022
User Manual
  • Updated on Nov 25, 2024
  • Published on Nov 25, 2024
Description R29, E16 V2.0, and X915 support selecting relay(s) to be triggered when they are connected to more than one door lock. Note The models with specific firmware versions support this feature:  R29 29.30.3.3 and above; E16 V2.0 ...
  • Published on May 20, 2022
IP Addresses can be obtained on the AiBase Smart Building door phones directly. After obtaining the IP address, you will be able to use it to log in to the device web interface for configuration or troubleshooting etc. This article briefs on how to...
  • Updated on Nov 25, 2024
  • Published on Nov 25, 2024
Description The Wiegand feature enables the Akuvox door phone to act as a controller or a card reader. After wiring the door phone with a third-party device via Wiegand ports, you need to configure Wiegand on the door phone's web interface. Tip...