How to configure HDMI wireless extender

New
  • Published on Aug 27, 2025
  • 1 minute(s) read
Prev Next

Description

This article introduces how to pairing the transmitter and the receiver on HDMI wireless extender (Model number: ACC-EXT-HDMI-WIRELESS-4K-200M)

Prerequisite
  • Model number: ACC-EXT-HDMI-WIRELESS-4K-200M

Step by Step instruction

1. Connect both TX (Transmitter) and RX (Receiver)

    • Install the antennas on both TX and RX
    • TX HDMI to the host

      image.png

    • RX connect to the monitor

      image.png

  1. Pairing TX and RX

        A. The device needs to be connected to a signal source and a screen. B. Use a network cable to connect the transmitter (TX) and the receiver (RX). The LINK lights flashing on both ends indicate a successful pairing. After successful pairing, the network cable can be removed, and the device will automatically switch to wireless transmission. C. If multiple receivers are needed, please pair each receiver individually using the method described above.

        Note: One transmitter can connect to up to 4 receivers.

image.png

3. Reset

      If you need to change the pairing method or abnormal status, you can restore the factory setting.
        Press and hold the reset buttons on both the transmitter and receiver for about 10–15 seconds. Release them once the LINK indicator light turns off—this indicates that the factory reset was successful.