Contents x
      How to setup Dahua Face Recognition on XVR
      • 13 Feb 2022
      • 5 Minutes to read
      • PDF
      Contents

      How to setup Dahua Face Recognition on XVR

      • Updated on 13 Feb 2022
      • 5 Minutes to read
      • PDF
      Article summary

      Description

      When a face is detected in the area, the system compares the face image captured with faces added to the face database and can link to an alarm output based on the comparison result.

      Initial Setup for Recorder

      Step by Step Instructions

      1. Enter the Main Menu and select AI

      image.png

      1. Click Parameters > Smart Plan

      image.png

      1. Click the Face Detection icon. It will highlight once enabled

      image.png

      1. Click Apply to save settings.

      image.png

      1. Click Parameters > Face Detection

      image.png

      1. Toggle the setting to Enable then click Apply

      image.png

      1. Click Parameters > Face Recognition

      Toggle the setting to Enable then click Apply

      image.png

      Face Recognition is now enabled

      How To Create A Face Database

      Step by Step Instructions

      1. From the Main Menu click AI

      image.png

      1. Click Database > Face Library

      image.png

      1. Make sure 'Type' is set to 'Local' using the drop down box - This will create a database direct on the recorder.

      Click Add in the bottom right of the screen to add a new database

      image.png

      1. Enter a name for the Face Library Name and click OK

      image.png

      1. The created database will appear in the Face Library list when created successfully

      image.png

      How To Add A Face To Face Library

      Step by Step Instructions

      Add By USB Drive

      USB drive with face picture(s) to create database should be plugged into recorder.

      1. From the Main Menu click AI

      image.png

      1. Click Database > Face Database

      image.png

      1. Select the face database in the list you want to add the face to by double clicking it. How To Create Face Database

      Click the image.png icon under Details to configure the database.

      image.png

      1. Click 'Register ID' to add a face to the database.

      image.png

      1. The Register ID interface will appear.

      Click the + to upload a new face image

      image.png

      1. The USB drive will automatically be loaded. Check the box next to the face image then click OK

      image.png

      image.png

      A message will confirm a successful upload

      1. Use the Register ID window to add additional information to this face entry, including Name and gender

      Click OK to save

      image.png

      1. A message will confirm a successful face addition

      image.png

      1. The added face will appear in the face database

      image.png

      Add By USB Drive (Batch Add)

      Face pictures can also be imported in batches which is useful when adding a large number of faces at one time.

      image.png

      Before importing pictures in batches, you can name the picture files using the following format for easier import:

      "Name#SGender#BDate of Birth#NRegion#TCredentials Type#MID No.jpg"

      "[Name]#S[Gender]#B[Date of Birth]#T[Type of Credentials]#M[ID Number]"

      For example a face picture for the following person:

      Name: John

      Date of Birth: 1990-01-01

      Type of Credentials: ID Card

      ID Number: 0000

      Should have the file name:

      "John#S1#B1990-01-01#T1#M0000".JPG or PNG

      ParameterDescription
      NameEnter a name, required
      GenderEnter a value, optional. 1 is 'male' and '2' is female
      Date of BirthEnter a value, optional. Format: yyyy-mm-dd, such as 2017-11-23
      GenderEnter a value, optional. 1 is 'male' and '2' is female
      Credentials TypeEnter a value, optional. 1 is ID card and '2' is passport
      ID numberEnter ID No. , optional

      Add From Captured Face Detection
      You can add images to build the Face Database using images that have been captured using the Face Recognition feature

      From the Live View, with AI Mode enabled:

      1. AI mode will display recently captured Face images in Live View on the right side of the screen

      How To Create Face Database - NewGUI - 12.jpg

      1. Click to select the Face you want to add from the list

      How To Create Face Database - NewGUI - 13.jpg

      1. The image will full screen.

      Click the button labeled "Add to Human Face Database" in the top right of the screen

      How To Create Face Database - NewGUI - 14.jpg

      1. The Register ID window will appear.

      You can add additional details for the Face entry including Name

      Check the box next to the Face Library you wish to add the face to

      How To Create Face Database - NewGUI - 15.jpg

      1. Click OK to save

      How To Create Face Database - NewGUI - 16.jpg

      1. The added face will appear in the Face Library

      How To Create Face Database - NewGUI - 17.jpg

      How To Add A Trigger Or Alarm Based on Face Recognition

      Step by Step Instructions

      1. Enter the Main Menu and select AI

      image.png

      1. Click Parameters > Face Recognition

      image.png

      1. Use the drop-down box to select the AI mode to configure.

      image.png

      Stranger Alarm
      Stranger Alarm: The NVR will compare live detected faces to faces that have been entered into the Face Library database. If the Face is not recognized the alarm will be triggered.

      1. Click the toggle button to enable

      image.png

      1. Click the Setting button next to Target Face Database

      image.png

      How To Create Alarms and Triggers For Face Recognition - NewGui - 4-1.jpg

      1. Check the box next to the Face Library to be used for Face Recognition then click OK

      image.png

      How To Create Alarms and Triggers For Face Recognition - NewGui - 5.jpg

      1. You can set various events to happen when the alarm is triggered including:

      Alarm Out Email Alert PTZ Activation Tour Buzzer

      image.png

      How To Create Alarms and Triggers For Face Recognition - NewGui - 6.jpg

      Click Apply to save all settings

      Common Mode
      Common Mode: The NVR will compare live detected faces to faces that have been entered into the Face Library database. When a face that has been added to the library has been detected, you can configure the NVR to respond with various actions, such as Buzzer, Email, and Alarm Outputs among others. A Similarity value (default 80%) can be adjusted

      1. Click the Setting button next to Target Face Database

      image.png

      How To Create Alarms and Triggers For Face Recognition - NewGui - 7.jpg

      1. Check the box next to the Face Library to be used for Face Recognition then click OK

      image.png

      How To Create Alarms and Triggers For Face Recognition - NewGui - 5.jpg

      1. To adjust the Similarity value click the icon under Modify

      image.png

      How To Create Alarms and Triggers For Face Recognition - NewGui - 8.jpg

      1. Enter a value for the Similarity from 1-100 then click OK

      image.png

      How To Create Alarms and Triggers For Face Recognition - NewGui - 9.jpg

      1. Click the Setting button next to Period

      image.png

      How To Create Alarms and Triggers For Face Recognition - NewGui - 10.jpg

      1. You can create a schedule for the alarm. By default the schedule is set to 24/7

      image.png

      How To Create Alarms and Triggers For Face Recognition - NewGui - 11.jpg

      1. Click the Tripwire Setup - NewGUI - Trigger.jpg icon to set the Trigger settings when the IVS Missing Object rule is engaged.

      image.png

      How To Create Alarms and Triggers For Face Recognition - NewGui - 12.jpg

      1. The Trigger menu will appear

      image.png

      How To Create Alarms and Triggers For Face Recognition - NewGui - 13.jpg

      Once the trigger rule settings have been created click Apply, then click Back to return to the previous menu

      1. Once all Missing Object settings have been configured, Click Apply in the lower right of the screen to save all changes

      image.png

      What's Next