How to set up one VTO and one VTH via configtool?
- 13 Feb 2022
- 1 Minute to read
- PDF
How to set up one VTO and one VTH via configtool?
- Updated on 13 Feb 2022
- 1 Minute to read
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Step by Step Instructions
Once devices are initialized go to device Config -> VTO
You only need to change the sip server IP of VTO and make it the same with your VTO's IP address.Then click on save. Configtool will do the restart to configure the devices. Once they reboot the configuration is done.
- Go to VTH.
You only need to change the sip server IP of VTH and make it the same with your VTO's IP address.Then click on ok.
- Go to VTH -> network terminals
You need to change VTO's IP address and type in the correct password of VTO,then enable VTO Status,click on save .
Configtool will do the restart to configure the devices. Once they reboot the configuration is done.