How to connect NVR by RTSP

  • Published on May 31, 2022
  • 1 minute(s) read
Prev Next

This article will tell you how to connect NVR by RTSP.

Operation Procedure

  1. Open network stream under media in VCL media player, paste the above rtsp and click play.

image.png

image.png

  1. The video from NVR will be shown from the start in VCL.

image.png

Note:
The above RTSP is an example only. Please use your own IP address, port, channel ID and the actual date and time to make rts. Then follow the above steps.

image.png

IP address and port can be obtained in ‘TCP/IP’ and ‘Port’ under Network section as below:

image.png

image.png