How to Configure the IP Speaker

To set up the AiBase IP speaker through POE switch. You need to install the Speaker IPTool on your PC and the PC should be connected to the same network as the speaker.

Download the Speaker IPTool here.

You can see the IP speaker list with the IP address on the IPTool.

1. Login

Login to the speaker in a web bwoser with the IP address. The defaulted username and password as below.
Username: admin
Password: admin

2. Network Setting

The default IP of the speaker is 192.168.0.200. Depending on your network requirements, change the IP address if necessary.

3. Enable ONVIF

On the ONVIF tab, select Enable ONVIF, then the device be searched by ONVIF VMS.
Default user name: admin,
Default password: admin123

4. Create SIP Account

Each speaker has two SIP accounts. Enter the SIP extension information and save the configuration. You can check if it has registered successfully on the "Status" tab.

Once configured, the speaker is ready for use.