Active Deterrence Function Setup Guide (Light, Warning Light, and Siren)

Topic:

• How to Active Deterrence Function on the Local Monitor
• How to Active Deterrence Function on the NVR’s Web Page

Compatible List

Related question:

• How to turn on/off the siren
• How to turn on/off the warning light
• My camera light doesn't work, what happened.
• How to setup schedule on warning light.
• How to disable the warning light( red/blue) light.

Note: To activate the deterrence function (both siren and warning light), you need to set up some events that can trigger the deterrence function first, such as AI events and motion event. PDVD function is Enabled by default and the detection area is full screen.

On the Local Monitor

1. Click on Main Menu icon in the bottom left corner and click on Setup button.

1. Select Deterrence in the Alarm section.

1. You can Enable or Disable the Light/Warning Light here and adjust the duration for them. Click on the Apply button to save settings.

Note: If the camera's Image Control is set to Full Color or Smart Illumination, the light for the deterrence function will be disabled.

1. Click the gear icon under Schedule column for 'Light' or 'Warning Light' to set up the deterrence function for different events. Click on the Save button to save settings.

1. Select Siren in the Alarm section.

1. Choose the Channel you want to set up, and modify the parameters as needed. Click on the Schedule button to set up the siren schedule.

1. Setup Siren schedule for different AI functions, Click on the SAVE button after the modification.

1. Click the 'Apply' button to save any modifications on this page.

On the NVR's Web Page

1. Click on Remote Settings, then select Deterrence in the Alarm section. Choose the Channel you want to set up, and modify the parameters as needed.

Note: If the camera's Image Control is set to Full Color or Smart Illumination, the light for the deterrence function will be disabled.

1. Click on the Light Schedule button to set up the light schedule.

1. Click on the Warning Light Schedule button to set up the warning light schedule. The steps are the same as those for setting up the light schedule.

1. Click on Remote Settings, then select Siren in the Alarm section. Choose the Channel you want to set up, and modify the parameters as needed.

1. Click on the Siren Schedule button to set up the siren schedule. Click on the OK button after the modification.