Troubleshoots & Others
- 6 Articles
- Updated on Jan 20, 2026
- Published on Jan 20, 2026
Introduction
This FAQ is intended to help resolve an issue where the Eyeonet recorder (NVR) becomes stuck on the boot or startup screen and cannot enter normal operation. This problem is commonly caused by firmware corruption or an interrupted sys...
- Updated on Aug 18, 2022
- Published on May 17, 2022
Description
This instruction is only for the Eyeonet NVR, DVR with a firmware version 1.2x upgrade to 1.33. if device firmware version is under 1.2x, this artical could not help.
Caution: The upgrade process may cause the device stop wor...
- Published on Feb 14, 2022
Phenomenon
Take TD-N128E 128 channels NVR as an example. Customer already added 96 IPCs, when adding the 97th IPC, it will popup prompt: Exceeded the max. Bandwidth allowed, like below:
Also we can find that there is no remain bandwidth i...
- Published on Feb 14, 2022
Phenomenon
a. There is a wireless bridge working with IPCs, IPCs are offline when devices are far from wireless bridge.
b. IPCs are the brand of the other companies, IPCs show offline when directly connect to NVR; when connect IPCs with Onvif...
- Published on Feb 14, 2022
Phenomenon IPC (under the other brands) is connected to the NVR but unable to show video facing compatibility issue.
Analysis a. Check whether the version of IPC is latest. The old version IPC might face some onvif compatibility issu...
- Published on Feb 14, 2022
Phenomenon
IPC has connected to NVR but it shows no video in NVR.\
Analysis
a. The IPC is used by multiple users at the same time thus there is issue to display IPC on NVR.
b. IPC is connected to NVR via Onvif protocol (Our pr...