---
title: "How to use ACC-IP-POE-702-POEC extender over coax"
slug: "how-to-use-acc-ip-poe-702-poec-extender-over-coax"
status: "update"
updated: 2024-02-23T22:35:03Z
published: 2024-02-23T22:35:03Z
canonical: "ametawiki.ametagroup.com/how-to-use-acc-ip-poe-702-poec-extender-over-coax"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://ametawiki.ametagroup.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to use ACC-IP-POE-702-POEC extender over coax

This article will tell you how to use the extender ACC-IP-POE-702-POEC with the coax cable to connect the camera in the system through POE switch.

1. It is recommended to use a POE switch with **10Mpbs** output and manually set the POE switch 10Mpbs output.

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image-L73GKJ4K.png)

1. When connecting to a POE switch, **all extenders must be connected to a camera**, otherwise the cameras connected by using extender on the POE switch will not work.

|  |  |
| --- | --- |
| ![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image-RWX155ND.png) | ![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image-4GUXEI27.png) |

          
          

#### NOTE:

Usually, the standard POE switch power supply method is **1/2 3/6**. Therefore, the 1/2 3/6 end of the extender connection should be connected to the POE switch, and 4/5 7/8 end of the extender terminate camera.

Determine the connection end according to the power supply mode of POE switch. If the POE switch power supply method is **4/5 7/8**, connect the 4/5 7/8 end of the extender to POE switch and 1/2 3/6 end of the extender terminate camera.

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image-2LMYFFH9.png)

1. When connecting cameras, please only **add one camera at a time**, and add another one after this camera is online.
2. If the camera is online, **both indicators (Link/Act and PoE) on the POE switch must be on**. Otherwise, if only one light is on or all indicators are off, the camera should be offline.

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image-FKY2Z46T.png)

1. (***optional**) 100M POE switch may work in short distance of the coaxial wire connection.

          
          

**Note: Is not recommended to use this extender over coax to connect the camera to NVR POE port directly.**