Step 1

Connect to Master CPE: Set IP address of your computer as 192.168.188.x (11-200), subnet mast 255.255.255.0. Connect your computer to the LAN port of the master CPE using an Ethernet cable and access the web page. The default IP address of the master CPE is 192.168.188.253.

Step 2

Set Master CPE to AP Mode: On the master CPE, access the settings and enter the setup wizard. Choose the AP mode, set the WiFi name and password, and then click on "Apply".

Step 3

Connect to Slave CPE: Connect your computer to the slave CPE using an Ethernet cable and access the web page. The default IP address of the slave CPE is 192.168.188.100.

Step 4

Set Slave CPE to Repeater Mode: On the slave CPE, access the settings and enter the setup wizard. Choose the repeater mode, then search for and select the WiFi name of the master CPE for binding.

Step5

Following the above steps, the slave CPE will connect to the WiFi of the master CPE through repeater mode, enabling network extension.