---
title: "How to setup CP5-900-S3"
slug: "how-to-setup-cp5-900-s3"
updated: 2024-01-19T22:54:27Z
published: 2024-01-19T22:54:27Z
canonical: "ametawiki.ametagroup.com/how-to-setup-cp5-900-s3"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://ametawiki.ametagroup.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to setup CP5-900-S3

Prerequisite

          

Model: NT-AP-CP5-900-S3

### **Step 1**

Set One CPE to H(master bridge), set another one to C (Slave bridge). ![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image-B2PHLLK7.png)

### **Step 2**

F is function and confirm button, S is setting button. Press F to choose function to set, Press S to set the value like channel. Press F again agian to confirm the value .success after blinking 5 seconds. **Master CPE channel must be same as Slave CPE** Example: H040: master channel 40 C040: slave channel 40 ![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image-9AZGADXB.png)

### **Step 3**

Press Reset 1 second on both side, the two outdoor devices will start bridging. ![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image-J4113UVZ.png)

Frenquently asked questions:

1. How can I know the signal strength?

**Click F button, you will see like P-35, which means signal strength is -35dbm. The bigger the number, the better the signal.** **For example: P-20 is better than P-50**
2. How can I connected the bridge's wifi ?

**If you want to connect the CPE's Wifi, you can turn on your WLAN on your phone and search SSID: Wireless 2.4G_XXXXXXXXX/Wireless 5.8G_XXXXXXXXX, wireless key is 66666666.**
3. How can I factory default the bridge ?

**If you have any issue, you can long press reset button 10s to reset the wireless bridge.**