How to setup 2-wire VTO and VTH system?

  • Updated on Feb 14, 2022
  • Published on Feb 14, 2022
  • 1 minute(s) read
Prev Next

Description

This guide will show how to setup a 2 wire VTO and VTH system.

Wiring

  1. Connect 2 wires to the two connections labeled under "2-Wire" on the back of the VTO.

image.png

  1. Connect 2-wires to the two connections listed under "2-wire0" on the back of the VTH

image.png

  1. Connect the other end of the 2 wires from the VTO to the 2 connections labelled "CH1" on the VTN.

  2. Connect the other end of the 2 wires from the VTH to the 2 connections labelled "CH2" on the VTN.

  3. Connect a network cable to the "LAN" connection on the VTN.

image.png

Setup

For SIP VTH/ VTO setup, click here