---
title: "How to Initialize VTO from DMSS App"
slug: "how-to-initialize-vto-from-dmss-app"
updated: 2022-02-13T19:31:35Z
published: 2022-02-13T19:31:35Z
canonical: "ametawiki.ametagroup.com/how-to-initialize-vto-from-dmss-app"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://ametawiki.ametagroup.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to Initialize VTO from DMSS App

### Description

This article goes over adding a secondary VTO to an already existing Video Intercom Kit setup

### Pre-Requisites

### Step by Step Instructions

1. Launch DMSS App, go to Home.
2. Tap on + to add device.
3. Choose **SN/Scan**, and then scan QR code of your VTO.
4. Serial number be populated. Tap on **Next**.
5. Choose **VTO** as device type.
6. Tap on **View Reasons**.
7. Tap on **Configure Network Again**.
8. Tap on **Next**.
9. Ensure that your phone and VTO device is connected on the same network, then tap on **Next**.
10. Enter password to initialize device, and also enter email address for reset password purposes. Tap on **Next**.
11. It will ask you to select whether you want to get cloud access and auto check for firmware update. Leave both of them checked, and then tap on **OK**.
12. Create Device Name, and then tap on **Save**.
13. Your VTO will reboot and ready to use.