How to Configure White LED on Door Phone
  • 13 May 2022
  • 1 Minute to read
  • PDF

How to Configure White LED on Door Phone

  • PDF

White light LED is mainly used to reinforce the lighting for the greater visibility of the users when see their images in the dark environment. The white light can be light up when scanning face, QR code.

On the device web interface, navigate to Intercom > Advanced. (For VDP-AK-29RC)

On the device web interface, navigate to Device > Light. (For VDP-AK-916XS)

Operation Instruction

  • While LED is helpful for face recognition and more clear captures during night time.
  • The documentation is for the version nigher than VDP-AK-29RC(29.30.2.471) and VDP-AK-916XS(916.30.1.113)

Operation Procedure

For VDP-AK-29RC

  1. Switch White Light Mode to Auto.
  2. Set up Max White Light Value, it can be 0 to 255, bigger value equals brighter environment.(Easier to be triggered) Click Submit.
  3. After configurations, during night time, when visitor walks towards AiBase Smart Building door phone, VDP-AK-29RC will light up white LED for better performance of face recognition and capture log.

For VDP-AK-916XS

  1. Switch the White Light Mode to Auto then click Submit.
  2. After configurations, during night time, VDP-AK-916XS will light up the white LED for better performance of face recognition and capture log.
**Note**
Following figure1 corresponds to all steps of VDP-AK-29RC.

image.png