How to Configure Tamper Alarm on the Door Phone
- 13 May 2022
- 1 Minute to read
- PDF
How to Configure Tamper Alarm on the Door Phone
- Updated on 13 May 2022
- 1 Minute to read
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
Tamper Alarm feature can be used to detect device abnormal shock and alarm to defend device from stolen or disassemble by bad guy. When abnormal shock happen at device side, device it self will enter into arming mode and play an arming voice ,at the same time, send an alarm message to property manager.
On the device web interface, navigate to Intercom>Advanced>Tamper Alarm.
Operation Procedure
Go to Intercom > Advanced - Tamper Alarm to configure.
Enable tamper alarm, Configure the Gravity Sensor Threshold value. It stands for the sensitivity of the sensor. The smaller the value is, the more sensitive the sensor will be.
If the gravity of door phone changes dramatically or the tamper alarm button changes due to movement pressure, it will trigger an alarm.