- 11 May 2022
- 2 Minutes to read
- PDF
How to Configure RTSP for Getting RTSP Live Streaming from Door Phones
- Updated on 11 May 2022
- 2 Minutes to read
- PDF
You can monitor the surrounding at the door phone from AiBase Smart Building indoor monitor.This article teaches you how to configure the RTSP function on both the indoor monitor and the door phone to get the RTSP Live Streaming from Door Phones obtain the RTSP video footage
Operation Instruction
This article is applicable to VDP-AK-28RA, VDP-AK-29RC, VDP-AK-916XS
Operation Procedure
- RSTP Configuration on the Door Phone
Model | Navigate to |
---|---|
VDP-AK-28RA / VDP-AK-29RC / VDP-AK-916XS | Intercom > RTSP > RTSP Basic |
- On the web interface, navigate to Intercom > RTSP > RTSP Basic to enable the RTSP server. select authentication type, and configure the RTSP authorization and authentication.
- Set RTSP OSD (one screen display) color and OSD text if needed. ( see below)
Note OSD setting is only applicable to VDP-AK-28RA |
- Enable the RTSP audio and video and select the audio and video type.
- select the video resolution, framerate, and bitrate for the video quality if needed.
Now, you have completed the RTSP setting on the part of the door phone, and you are required to configure RTSP setting on the indoor monitor or the third-party device to obtain video stream from the door phone for the monitoring purpose.
- RSTP Configuration on the Indoor Monitor. RTSP configuration on the Web interface
- On the web interface, navigate to Phone > Monitor > Door Phone.
- Enter Door Phone IP or SIP number and ID number for the identification purpose when selecting which door phone to be monitored.
- Enter the door phone RTSP URL, the username, and password for the authentication purpose, then enable Display in Call If you want to keep watching the door phone video image while you are on the phone call.
**Note** RTSP address format for the AiBase Smart Building door phones is“ rtsp://device IP/live/ch00_0” for example “rtsp//192.168.31.2/live/ch00_0”. While the RTSP address format for the third-party IP camera is provided by the IP Camera manufacturer. |
- RTSP configuration on the device
- Navigate More > Setting and swipe left, then press More, and enter the default system code " 123456").
- Press Monitor, and press +New on the right side of the screen, then set up the RTSP as you do on the web interface.
After that, you will be able to obtain RTSP video footage from the door phone.
Press on the Monitor icon, and press + please choose a device, then select the door phone to be monitored.