- 25 Apr 2022
- 2 Minutes to read
- PDF
How to Configure Motion Detection in Door Phone
- Updated on 25 Apr 2022
- 2 Minutes to read
- PDF
Motion detection is the process of detecting a change in the position of an object relative to its surroundings or a change in the surroundings relative to an object. This function can be used to detect changes in the environment around your house or building, and send relevant screenshots, calls or preset messages when necessary.
AiBase Smart Building motion detection supports to be triggered by IR sensor or by the camera detection. Infrared detection is induced by temperature changes, but when the temperature is too high, thermal induction may occur and there may be errors. Video Detection refers to the image motion detection based on the camera. It is a method of processing the image based on the image captured by the camera to determine whether there is suspicious object, with high accuracy. In addition, the image motion detection allows the administrator to select the camera image a certain range (equivalent to taking a certain part of the screen) for detection, which is highly configurable and can also meet some privacy protection requirements (such as the door phone camera will take pictures of some private houses, but video motion detection can be detected Designated area captured). This article will tell you how to configure the motion detection on the device without SmartPlus.
Before Start
- Motion detection can be enabled by device or SmartPlus if your device connects with SmartPlus, and the door phone is working as the door phone for a building.
- Which models support IR motion detection : VDP-AK-29RC, VDP-AK-916XS, VDP-AK-28RA
- Which models support video motion detection: VDP-AK-28RA,VDP-AK-29RC.
- Which models can be configured motion detection on the device screen: VDP-AK-29RC, VDP-AK-916XS
- Which models can be configured motion detection on the device webpage: All Door Phones
Configure Motion Detection
Active the Motion Feature and Choose a Detection Mode
Login the door phone web with username/password (admin/admin), go to Intercom - Motion interface to enable motion feature, according to you scenario to choose a detection mode.
Motion on the VDP-AK-916XS, VDP-AK-29RC
Motion on VDP-AK-28RA
Receive Motion Information
You can go to Setting > Action on the web interface to configure the receiving of motion detection.
Receive by Email
You can choose receive the motion detection scrennshot by email.
Receive by FTP Server
You can enter a FTP Server address then receive the motion detection screenshot by FTP server.
Receive by TFTP Server
You can enter a TFTP server address then receive the motion detection screenshot by TFTP server. This feature need to work with SDMC server. Enter the SDMC server address then you can get the image in SDMC server.
Receive by a SIP Call
You can enter a number then call a SIP call when the motion detection is triggered.
Tips
If you need to check the parameter definition,please check the corresponding administrator guide.