---
title: "How to configure HDMI wireless extender"
slug: "how-to-configure-hdmi-wireless-extender"
updated: 2025-08-27T19:07:45Z
published: 2025-08-27T19:07:45Z
canonical: "ametawiki.ametagroup.com/how-to-configure-hdmi-wireless-extender"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://ametawiki.ametagroup.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to configure HDMI wireless extender

## Description
> **This article introduces how to pairing the transmitter and the receiver on HDMI wireless extender (Model number: ACC-EXT-HDMI-WIRELESS-4K-200M)**


* * *

:::(Info) (Prerequisite)
* **Model number: ACC-EXT-HDMI-WIRELESS-4K-200M** 

:::


## Step by Step instruction
:::(Info)
     1. Connect both TX (Transmitter) and RX  (Receiver)
     <ul><ul><li>Install the antennas on both TX and RX
        <li> TX HDMI to the host  
 

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image-Q0ZQ9CSB.png){height="" width=""}

<li> RX connect to the monitor
    
![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image-S59NE7RP.png){height="" width=""}


:::

:::(Info)
2. Pairing TX and RX
     <ul><ul> A. The device needs to be connected to a signal source and a screen.
                     B. Use a network cable to connect the transmitter (TX) and the receiver (RX). The LINK lights flashing on both ends indicate a successful pairing. After successful pairing, the network cable can be removed, and the device will automatically switch to wireless transmission.
    C. If multiple receivers are needed, please pair each receiver individually using the method described above.
   <br><br> 
    
    Note: One transmitter can connect to up to 4 receivers.
    </ul></ul>
    
    

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image-MVPJQYSP.png){height="" width=""}


:::
     
:::(Info)    
    3. Reset <ul><ul> If you need to change the pairing method or abnormal status, you can restore the factory setting.
    <ul>Press and hold the reset buttons on both the transmitter and receiver for about 10–15 seconds. Release them once the LINK indicator light turns off—this indicates that the factory reset was successful.
    </ul></ul></ul>

:::