---
title: "How to add new card or key fob on ASC1201"
slug: "how-to-add-new-card-or-key-fob-on-asc1201"
updated: 2022-02-11T21:06:34Z
published: 2022-02-11T21:06:34Z
canonical: "ametawiki.ametagroup.com/how-to-add-new-card-or-key-fob-on-asc1201"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://ametawiki.ametagroup.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to add new card or key fob on ASC1201

Step 1 Press [#] + admin password, and press [#] again to enter the main menu.

Step 2 Press [1] + [#] key to add a user

1. Add user ID (1 to 8 digits). Input ID and end up with [#] key(If the user ID exists already, it will fail to be added)
2. Add a card. Swipe a card and end up with [#] key (If card number is not needed, press [#] key directly to skip this step. )
3. Add password (1 to 8 digits)

a. If it is necessary to set password, input a password and press [#] key b. Otherwise, press [#] key directly.

One user is added after completing above 3 steps. Continue to add other users in this way. After adding users, the system stays at “Add User” menu. Please press [*] key to return to the main menu.

Note

* Indicator light is green and normally on, and the buzzer beeps once, which means that the user has been added successfully. * Indicator light is red and normally on, and the buzzer beeps for three times, which means that it failed to add the user.