---
title: "How to add DHI-VTO-4202F-P-S2 to VTH via Configtool"
slug: "how-to-add-dhi-vto-4202f-p-s2-to-vth-via-configtool"
updated: 2022-02-13T19:25:18Z
published: 2022-02-13T19:25:18Z
canonical: "ametawiki.ametagroup.com/how-to-add-dhi-vto-4202f-p-s2-to-vth-via-configtool"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://ametawiki.ametagroup.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to add DHI-VTO-4202F-P-S2 to VTH via Configtool

### Description

This article will go over the setup DHI-VTO4202F-P-S2 with Dahua Indoor Monitor by using Configtool software.

### Pre-requisites

### Video Instructions

[Embedded content](https://www.youtube.com/embed/FqZym1yhWmo)

[Embedded content](https://www.youtube.com/embed/yR74cBqQURQ)

### Step by Step Instructions

1. Once devices are initialized go to Building Config

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image%28715%29.png)

1. Go to Global Parameter

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image%28714%29.png)

1. Global Parameters

**Global Parameter**

|  |  |
| --- | --- |
| Center Number = Leave Default | Server Type = VTO |
| Sever Address = Main VTO IP Address | Server Port = 5060 |
| Sever Username = Recommended to match VTO username | Sever Password = Recommended to match VTO password |
| Sip Domain = VDP | Register PWD = Leave Default |
| VTO Username = Enter VTO username | VTO Password = Enter VTO password |
| VTH Username = Enter VTH username | VTH Password = Enter VTH Password |

Enter the information by following the table above. Click on **OK** to proceed

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image%28713%29.png)

1. Create a project by clicking on **Add Node**

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image%28712%29.png)

1. Select the amount of Floors and Rooms will be added to the project. In this guide we will only have 1 floor with 1 room with 0 extensions for each room. Click on **OK**

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image%28711%29.png)

1. Check serial number of the Main VTO and the Project entry and click on Association. This will link the Main VTO with the project entry

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image%28710%29.png)

1. Do the same with the VTH

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image%28709%29.png)

1. Once all the devices are associated click on Association List

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image%28708%29.png)

1. Check all the devices and click on **Config**

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image%28707%29.png)

1. Configtool will do the rest to configure the devices. Once they reboot the configuration is done

![image.png](https://cdn.document360.io/698fbf35-46b1-42c8-9a01-0506761ce4e8/Images/Documentation/image%28706%29.png)