Description:

LCD will detect if there is any object crossing the warning line, it can support different direction selection, such as A->B, B->A and bidirectional, and it can activate record, snapshot and alarm according to the judgment result.

Note: Face Detection, Pedestrian & Vehicle, Perimeter Intrusion, Line Crossing, Object Detection, Cross Counting, Crowd Density, Queue Length, and License Plate functions cannot be used simultaneously (you can switch between them using the AI Schedule function). The Pedestrian & Vehicle (PDVD) AI function is enabled by default. If this is your first time setting up this AI function, you must disable PDVD first. To do this, select 'Pedestrian & Vehicle,' choose the channel you want to configure, uncheck the box to disable PDVD, and then click the 'Apply' button. 

Compatible List:

Related question:

• How many LCD rules I can setup for each channel?
• How to active deterrence and siren?
• How do I search for AI events and watch their playback?

On the Local Monitor

1. Click on Main Menu icon in the bottom left corner and click on Setup button.

2. Select Detection Setup from the AI Section.

3. Click 'Line Crossing,' select the channel you want to configure, check the box under the 'Switch' column, and then click the 'Apply' button.

4. Click the gear icon to go into the setup page of LCD

5. Use the drop-down box to select the Channel, choose the Detection Target, choose your Rule Number then left click anywhere inside the video frame and drag to draw the line. Double left-click to finish drawing. A rule number will appear at the starting point of the line. Check the box to activate the line for editing. Enable the rule, select the Rule Type (crossing direction), and click the 'Save' button. Repeat this step to add additional rules (lines). You can set up a maximum of 4 rules per channel. You can adjust the detection sensitivity or leave it at the default setting.

On the NVR’s Web Page

1. Click Remote setting, select Setup from the AI section, click on 'Line Crossing,' select the channel you want to configure, enable the function, choose the Detection Target, choose your Rule Number then left click anywhere inside the video frame and drag to draw the line. Double left-click to finish drawing. A rule number will appear at the starting point of the line. Check the box to activate the line for editing. Enable the rule, select the Rule Type (crossing direction), and click the 'Save' button. Repeat this step to add additional rules (lines). You can set up a maximum of 4 rules per channel. You can adjust the detection sensitivity or leave it at the default setting.

Note: You can also set up this AI function on the camera’s web page, and all saved settings will be synchronized with the NVR. The setup process is very similar to configuring it on the NVR’s web page.