This article is the instruction of how to configure the connection of Door Station and Indoor monitor.

Operation Instruction

This article is applicable to VDP-AK-916XS, VDP-AK-29RC, VDP-AK-28RA, VDP-AK-313CW and VDP-AK-49RG.

Operation Procedure

1. set Contact List on Door Station

VDP-AK-29RC as an example:

a. On device local interface:
Go to Contact --> Add Contact, enter the contact's name and number and save the setting.    

b. On the web UI, go to Contacts --> Contact List. enter the contact's name and Phone number then hit Add button to save setting.

Note:
The contact phone can be an IP address of the device or the call group that is set on Dial Plan.

2. set Contact List on Indoor Monitor

VDP-AK-313CW

a. On device local interface:    
Go to Contacts --> All Contacts --> Add New, enter the contact's name and number then Save the setting.

 b. On the web UI, go to Contacts --> local Contacts. Enter the contact's name and number then hit Add button to save setting.